 |
 |
 |
 |
 |
|
 |
 |
|
 |
 |
Custom Archtop Specification Options
| As a custom maker, I can build any of my models to a client's chosen specification. Check out the options… | ||||
|
Woods:
Neck: Mahogany or Maple Fingerboard: Indian Rosewood or Ebony Body: Quilted or Flame Maple Body Facing: Spruce or Cedar |
 |
 |
 |
|
Fingerboard Radius: | ||||
| Single radius: 225mm (9"), 250mm (10") or 300mm (12"). |
Compound radius: 250mm to 350mm (10" to 14") or 300mm to 400mm(12" to 16")
|
|||
 |
 |
 |
Scale Length:
22 or 24 frets at 628mm (24¾"),635mm (25") or 648mm (25½"). |
|
|
 |
Fret Size:
Dunlop 6100 (wide and tall) orDunlop 6105 (narrow and tall).
Neck Dimensions:
Standard size:Nut width: 43mm (1.11/16"), width at fret 22: 58mm (2.9/32"). The profile of my standard neck is best described as the nicest '59 Les Paul you laid your hands on! It has a depth at the 1st fret of 22mm (7/8"), at the 12th fret it's 24mm (15/16"). Optional neck depths are 21mm or 23mm at 1st fret to 23mm or 25mm at 12th fret. |
||
|
Fingerboard Inlays:
If standard 6mm Mother-of-Pearl dots or small offset blocks don't take your fancy, then let's chat about it! Don't forget, all my inlays are done by hand, not computer - they take a great deal of time and can therefore add a lot to the price of your guitar.
Hardware:
All guitars are adaptable to receive standard or locking tuners
Pickups:
My favourite pickups are Seymour Duncan, DiMarzio, Tom Holmes and Harmonic Design. However, I'll fit anything you want.
Electrics:
Each guitar has standard placement for the pickup selector switch, volume and tone controls but various wiring options (custom coil-splits etc.) are available, depending on pickups chosen.
| ||||