 |
 |
As a custom maker, I can build any of my models to a client's chosen specification. Check out the options...
Woods:
Neck: Mahogany, maple or solid rosewood when available. Bolt-on or set neck.
Fingerboard: Indian rosewood, ebony or maple.
Body: Mahogany, swamp ash or alder (with or without tone chambers).
Body Facing: Flamed or quilted maple in varying grades. |
|
Fingerboard Radius:
Single radius:
225mm (9"),
250mm (10") or
300mm (12").
Compound radius: 250mm to 350mm
(10" to 14") or 300mm to 400mm
(12" to 16") |
 |
 |
 |
Scale Length:
22 or 24 frets at 628mm (24¾"),
635mm (25") or
648mm (25½").
|
 |
 |
 |
|
Fret Size:
Dunlop 6100 (wide and tall) or
6105 (narrow and tall).
Neck Dimensions:
Standard size: Nut width: 43mm (1.11/16"), width at fret 22: 58mm (2.9/32").
|
 |
|
The profile of my standard neck is best described as the nicest '59 Les Paul you laid your hands on! It has a depth at the 1st fret of 22mm (7/8"), at the 12th fret it's 24mm (15/16"). Optional neck depths are 21mm or 23mm at 1st fret to 23mm or 25mm at 12th fret.
|
|
Fingerboard Inlays:
If standard 6mm Mother-of-Pearl dots or small offset blocks don't take your fancy, then let's chat about it! Don't forget, all my inlays are done by hand, not computer - they take a great deal of time and can therefore add a lot to the price of your guitar.
|
Hardware:
All guitars are adaptable to receive standard or locking tuners - fixed or vibrato bridges. The choice is yours.
|
|
Pickups:
My favourite pickups are Seymour Duncan, DiMarzio, Tom Holmes and Harmonic Design. However, I'll fit anything you want. Any configuration of humbuckers and/or single coils can be installed on each model of guitar.
|
 |
|
Electrics:
Each guitar has standard placement for the pickup selector switch, volume and tone controls but various wiring options (custom coil-splits etc.) are available, depending on pickups chosen.
|
